---
title: Wiring the Typhoon Hand Held Controller
description: When wiring the Typhoon Hand Held, please remember not to exceed 3.5Amps per button. When you overload the Typhoon Hand Held Controller it may make a sound/perform a function briefly, then turn off. T
---

[Skip to content](https://help.feniex.com/migration/en/knowledge/wiring-the-typhoon-hand-held-controller#main-content)

English

Show submenu for translations

[Contact us](https://help.feniex.com/migration/en/knowledge/kb-tickets/new?hsLang=en)

![feniex-email-logo.png\]](https://help.feniex.com/hs-fs/hubfs/feniex-email-logo.png?height=40&name=feniex-email-logo.png)

Open main navigation

Close main navigation

- English
  
  Show submenu for translations
- [Contact us](https://help.feniex.com/migration/en/knowledge/kb-tickets/new)
- Go to feniex.com

 Go to feniex.com

 How can we help you?

- There are no suggestions because the search field is empty.

1. [Help Center](https://help.feniex.com/migration/en/knowledge?hsLang=en)
2. [Technical Support](https://help.feniex.com/migration/en/knowledge/technical-support?hsLang=en)
3. [Basic Wiring](https://help.feniex.com/migration/en/knowledge/technical-support?hsLang=en#basic-wiring)

# Wiring the Typhoon Hand Held Controller

![](https://help.feniex.com/hubfs/Knowledge%20Base%20Import/feniexhelp.zendesk.comhcarticle_attachments360007432693mceclip0.png)

When wiring the Typhoon Hand Held, please remember not to exceed 3.5Amps per button. When you overload the Typhoon Hand Held Controller it may make a sound/perform a function briefly, then turn off. This is a built in safety feature that will help protect the Typhoon Hand Held Controller from electrical surges. 

![](https://help.feniex.com/hubfs/Knowledge%20Base%20Import/feniexhelp.zendesk.comhcarticle_attachments360007431153typhoon_ff.png)

 

Step 1: Run a 12-14 gauge wire to a known good grounding location, we recommend the batteries negative terminal. Once ran, connect the ground wire to the 12v-DC slot on the Typhoon Hand Held. 

Step 2: Run a 12-14 gauge wire to your batteries 12v+ terminal and wire that into the Typhoon Hand Held 12v+DC slot.

Step 3: Begin wiring in your products to the Typhoon Hand Held.

Step 4: Program the buttons on the Typhoon Hand Held Controller to match what you have wired into the unit or desired functionalities.

Step 5: Test Functionality. If some products do not work, please inspect your wiring for defects. 

Step 6: If all of your wiring is correct and the product is not overloaded, please contact Feniex Technical Support for assistance (1-800-615-8350)

For all other Typhoon Hand Held Controller inquiries please see the appropriate articles or go to our website and research the literature for this product. 

- [Technical Support](https://help.feniex.com/migration/en/knowledge/technical-support?hsLang=en#main-content)

    - [Basic Wiring](https://help.feniex.com/migration/en/knowledge/technical-support?hsLang=en#basic-wiring)

[![Chill listening crop-3](https://help.feniex.com/hs-fs/hubfs/red_logo_clear_small%20(9).png?width=58&height=24&name=red_logo_clear_small%20(9).png "Chill listening crop-3")](https://www.feniex.com/images/logo.png)

feniex.com Help Center

Copyright © 2026, Feniex Industries