Step 1: Run a 18-20 gauge wire to a known good ground location (typically the negative battery post (12v-)) and run the wire to the main negative terminal on the Storm Pro 200w.
Step 2: Run a 18-20 gauge wire to the positive battery post (12v+) and run the wire to the main positive terminal on the Storm Pro 200w.
Step 3: Begin wiring in the products you will be using.
Step 4: Test Functionality. If some products do not work, please inspect your wiring for defects.
Step 5: If all of your wiring is correct, the product is not overloaded, and the fuse is not blown please contact Feniex Technical Support for assistance (1-800-615-8350)
For all other Storm Pro 200w inquiries please see the appropriate articles or go to our website and research the literature for this product.